What should be paid attention to when strengthening the building formwork

In order to ensure the construction effect of building formwork, its surface should be cleaned before installation, and no residue is allowed, otherwise it will affect the cleanliness.
In order to avoid defects such as slag inclusion, soft tools should be used as much as possible during cleaning, and other foreign matters should be avoided on the surface. During construction, steel strips need to be erected according to relevant standards for reinforcement. In order to ensure the construction effect, attention should also be paid to details. During reinforcement, in the case of horizontal installation, it is necessary to use a steel ruler to measure the formwork and leave three to four nails around the same height, so as to ensure the reinforcement in a horizontal state during installation. After determining the position, when installing the screws, it is necessary to ensure that the tightness between each screw is consistent, so as to ensure that the tightness of the steel belt and the pressure it bears are consistent.
When closing, the gap can be filled with concrete at the bottom plane of the product, which is 0.5-1cm away from the ground as far as possible.